Thermal insulation titanium butterfly valve, titanium butterfly valve, butterfly valve

Product Features 

The material used for the heat-insulating titanium butterfly valve is titanium, which is a metal with high chemical reactivity. 

However, it exhibits particularly excellent corrosion resistance to many corrosive media. 

The reason is that titanium has a strong affinity for oxygen, and it readily reacts with oxygen to form a hard and dense protective oxide film on its surface. 

The titanium butterfly valve is virtually non-corrosive in air, fresh water, seawater, and high-temperature steam. 

The titanium butterfly valve is suitable for flow regulation. However, due to the relatively high pressure loss of the titanium butterfly valve in the pipeline, it is approximately three times that of the gate valve. 

Therefore, when selecting a titanium butterfly valve, one should fully consider the impact of pressure loss on the pipeline system, and also take into account the robustness of the butterfly plate in withstanding the pressure of the pipeline medium during the closing process. 

Furthermore, in cases where an elastic valve seat is chosen, it is also necessary to consider the temperature limit of the high-performance PTFE (graphite) composite sealing ring in terms of the working temperature it can withstand at high temperatures. 

When selecting the titanium valve material, it is necessary to fully consider four aspects: the working temperature of the corrosive medium in the working condition, the composition of the medium, the concentration of each component, and the water content.

The heat-insulating titanium butterfly valve is applicable to power plants, steel mills, petroleum, petrochemicals, natural gas, chemical plants, chemical fiber factories, dyeing and printing factories, paper mills, metallurgy, buildings, municipal water supply, sewage treatment plants, and other fields. The product has a novel design, advanced structure, and exquisite craftsmanship, and is a recommended product for engineering construction.

Packing of Standard Packing: 

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 470 gallon liquid totes Special package is available on request. E FORUs’  is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.