High-pressure vertical check valve, vertical check valve, check valve

Overview of the high-pressure vertical check valve product:

The high-pressure vertical check valve is normally in a closed state. Due to the pressure of the medium at the inlet end of the pipeline, it overcomes the resistance of the spring to open the valve. When the pressure at the inlet end is lower than that at the outlet end, the spring pushes the valve disc towards the valve core, causing the valve to close and preventing the reverse flow of the medium, thus serving the function of a check valve. Since the valve core is supported by a spring, it can be installed vertically or horizontally.

The high-pressure vertical check valve is normally in a closed state. Due to the pressure of the medium at the inlet end in the pipeline, it overcomes the resistance of the spring and causes the valve to open. When the pressure at the inlet end is lower than that at the outlet end, the spring will push the valve disc towards the valve core, causing the valve to close and preventing the reverse flow of the medium, thus performing the function of a check valve.

Packing of Standard Packing: 

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 470 gallon liquid totes Special package is available on request. E FORUs’  is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition