Yinke nickel alloy ball valve, alloy ball valve, ball valve

Inconel600 nickel alloy ball valve Product overview:

Inconel600 Inconel nickel Alloy ball valve is a valve body, valve body cover, ball and stem by Inconel600 or Alloy 600 and N06600 casting or forging, in high temperature conditions and corrosive medium has good oxidation resistance, and can resist all kinds of sulfide and chloride ion erosion, reduce stress corrosion, It is also suitable for Inco nickel alloy ball valve used in a variety of organic and inorganic compounds. The material used in the main part of the valve is nickel-chromium iron alloy, the main element is 6%~10% Fe and 14%~17% Cr and higher than 72% Ni, its corrosion resistance in the atmosphere, water and steam medium is excellent, in some weak acid, dilute oxidation and reducing acid corrosion resistance is also very good, in a variety of weak organic acid corrosion rate is also very low. The high nickel composition not only makes it a very excellent resistance to chloride stress cracking corrosion, but also has a strong corrosion resistance in alkaline solution, such as NaOH solution at boiling temperature, the concentration of NaOH can reach 80%, when there is sulfide in NaOH, its corrosion resistance is better than pure nickel, the steel is also resistant to various neutral, caustic salt corrosion. It can be used for dry chlorine gas and dry hydrogen chloride gas at room temperature, but it can only be used for hydrogen fluoride gas ≤550℃ at high temperature.

Inconel600 nickel alloy ball valve product advantages:

Inconel600 for secco nickel alloy ball valve due to both corrosion, heat resistance, oxidation resistance and high strength characteristics, and therefore is widely used in petrochemical, chemical, chemical, heat treatment, and nuclear power industries.

Inconel600 for secco nickel alloy ball valve due to both corrosion, heat resistance, oxidation resistance and high strength characteristics, and therefore is widely used in petrochemical, chemical, chemical, heat treatment, and nuclear power industries.

Packing of Standard Packing: 

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 470 gallon liquid totes Special package is available on request. E FORUs’  is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition