Z945X-10 cast iron electric dark rod soft seal gate valve,cast iron electric dark rod soft seal gate valve,Electric dark rod soft seal gate valve,Dark rod soft seal gate valve

Z945X-10 type cast iron electric dark rod soft seal gate valve: electric, flange connection, dark rod wedge-type rigid single gate, seat sealing surface material for nitrile rubber, nominal pressure PN10, valve body material for gray cast iron gate valve.

Structural characteristics 

Z945X-10 cast iron electric dark rod soft seal gate valve

It refers to the valve that the closing piece (gate) moves along the vertical direction of the channel axis. It is mainly used as a cutting medium on the pipeline, that is, it is fully open or fully closed. Generally, gate valves should not be used as regulating flow. It can be applied to low temperature pressure can also be applied to high temperature and high pressure, and according to the different material of the valve. But the gate valve is generally not used to transport mud and other media in the pipeline.

Advantages:

① Small fluid resistance;

② the torque required for opening and closing is small;

③ It can be used in the ring network pipeline where the medium flows in two directions;

④ When fully open, the sealing surface is less eroded by the working medium than the cut-off valve;

⑤ The shape structure is relatively simple, the manufacturing process is good;

⑥ The structure length is short. The integrity rate of the valve is related to the selection of the valve, the manufacture of the valve, the design of the pipeline, the assembly of the valve, the opening and closing of the valve and the management of the valve. Of course, the main reason is the quality of the valve. In order TO ensure that the piping system can achieve the highest efficiency, the lowest cost and the longest service life, the correct application of the valve is essential.

Product us

This product is widely used in petroleum, chemical, pharmaceutical, electric power and other industries, in the nominal pressure ≤1.0MPa steam, water, oil and other media pipeline for opening and closing.

Packing of Standard Packing: 

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 470 gallon liquid totes Special package is available on request. E FORUs’  is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition